Wireless radio remote control kit composed of a radio remote control (transmitter), a receiver and a Driver 06 or ST/Driver control unit. GeoCrop is your best solution for controlling and operating your equipment directly from the cabin.
-No cables or electrical connections
-Light, compact, easy-to-use radio remote control.
-Modular receiver that’s quick to install
-Series Driver 06 or ST/Driver control unit with metered section valves

TRANSMITTER
-Current draw at idle: < 2 μA;
-Average current draw while transmitting: 15 mA;
-Indicator light signals transmission of command;
-Indicator light signals battery is almost exhausted (100 hours before exhaustion);
-Silicone rubber keyboard;
-Useful range in open fields: 80 m (with new batteries;
-Dimensions: 165×78×35 mm

RECEIVER
-Microprocessor control;
-Housing made of polyester reinforced with fiberglass;
-Dimensions: 80×75×55 mm;
-Protected against reverse-polarity connection;
-Powered through connection to vehicle battery;
-Current draw at idle: 18 mA (12V);
-Maximum deliverable current per channel: 4 A;
-Total maximum deliverable current: 7 A.

CONTROL UNIT
Electric control unit DRIVER-06 or ST/DRIVER series, with electric volumetric valve, manual adjustable pressure relief valve, main control valve (filter only for ST/Driver) and metered section valves. Pressure gauge included.

GeoCrop can control: 3, 5 or 7 section valves, 1 main control valve and 1 volumetric valve. Can be used with Geoline control units, only.